|
March 9, 2005
STOW Construction Equipment’s new line of core drilling products makes it simple for everyone from the pro contractor to weekend do-it-yourselfer to drill many materials, including concrete, brick and masonry block.
STOW
’s CDM-1H hand-held core drill is designed for multiple smaller applications. It’s perfect for electrical and plumbing jobs where operators need to drill through walls and floors. This single-speed model excels in wet drilling applications up to 3 inches (7½ centimeters) in diameter or it can be used with
STOW
’s Cobra dry drilling bits up to 5 inches (12½ cm.) in diameter. The Cobra is made specifically for drilling reinforced concrete dry.
The 11 amp, 115-volt hand-held core drill operates at 0-1,800 rpm. This drill weighs only 9 pounds (4 kilograms). It comes with a convenient, adjustable shoulder rest, a three-position hand grip and internal water feed. A carry case and tools are also included.
STOW’s CDM-2CSA is a compact drill rig for applications requiring accurate straight or angled holes. It can be mounted by a bolt or vacuum base. The rig’s adjustable angle column simplifies angle drilling. This dual-speed 15-amp unit has a 9-inch (23 cm.) capacity. With motor, the drill rig weighs 62 pounds (28 kg.).
Two full-size drill stands are designed for larger jobs where accuracy and versatility are required, such as drilling concrete for post and flag pole installation.
STOW
’s CDM-3CS Straight Mast and CDM-3CSA Angle Base models have bit capacities of 10 inches (25 cm.) and with an optional spacer block, 12 inches (30½ cm.). Both can be used as bolt or vacuum base with an optional vacuum pump.
The columns on both drill stands reach 42 inches (107 cm.) high. The stands weigh 70 and 75 pounds (31½, 33¾ kg.), respectively, and can be driven with either
Milwaukee
’s 4096 or 4094 motors, or a DM-15A9C power source.
Options with these drill rig stands include a vacuum pump, switch box assembly and spacer block.STOW Construction Equipment, a division of Multiquip Inc., is a leading supplier of concrete and masonry working equipment, dewatering pumps, diamond blades, and surface preparation products. World headquarters are located at
18910 Wilmington Ave.
,
Carson
,
California
,
USA
90746. For more information, call 877/BUY-STOW (289-7869) or visit www.stowmfg.com.
|
